Automatic Beam Shaft Threading Machine

The warp beam is the middle link connecting warping and weaving. The beam with yarn needs to be threaded before it can be used by the Warp Knitting Machine. After the yarn is used up, the shaft needs to be pulled before it can be warped. However, the existing threading and pulling shafts all use manual insertion of the warp shaft into the preset disc group. Because the coaxiality between the beams cannot be guaranteed, and the coordination between the warp shaft and the beam is completely aligned with the human eye, the shaft threading action is extensive and dangerous, which is easy to cause damage to the warp shaft and disc head. At the end of the process of pulling the shaft, because the shaft is not well supported, it often falls directly on the floor, causing the shaft damage. Due to the heavy beam shaft, industrial accidents frequently occur when manually threading the shaft and pulling the shaft, resulting in great physical and mental damage to the operator, and also bring certain economic losses to the customer. Customer demand for automatic, efficient and low-loss spindle threading machines is growing.

Our Warp knitting beam shaft loading-pulling device achieves threading of various sepcification beams without manual intervention, safe and efficient, the shaft movement is stable and reliable.

Product advantages:

1. The electrical control system and the mechanical part work together, and the full automation saves time and effort and improves efficiency.

2. Can adapt to a variety of quantities and specifications of the warp beam.

3. The horizontal limit mechanism and vertical adjustment mechanism are set up in the reciprocating lifting parts, which can compensate for the shaft bending and the beam external damage caused by the shaft is not smooth.

4. The tail lifting parts make the shaft pulling action reliable and stable, avoiding the damage to the warp shaft and beam.